We are supported by our readers. If you make a purchase, we may earn a small commission at no extra cost to you. Learn More.
What if you find yourself searching for how to raise office chair without lever? Yes, we find it no fun to sit around in one posture for hours and to focus on the work to get completed before the office time runs out. Make it a day or two to bear all the pressure building around your back and lower back for carelessly seating without adjusting the height or anything but you would not be able to keep it continued for the long run. Wanna do everything to keep the office chair bringing you the utmost seating comfort but it misses the lever to seamlessly adjust its height; do not worry at all as we got some easy-to-follow processor that would comfortably raise and adjust the office chair’s height to the optimal level which you demand.
How to Raise Office Chair without Lever
Though it is super convenient to raise the office chair with a lever, we got some old-fashioned office chairs that completely lack the existence of a lever attached below the seat where it just requires the push of your hand to make the chair go up and down without having seated over it.
Many older office chair models do not have this particular functionality of having the lever but they do not entirely lack the feature of not getting raised or lowered manually.
Allow us to bring up the workarounds to raise the office chair without the help of a lever.
1- Bolt
Yes, the older office chairs would certainly have the bolt placed beneath the seating area. Kinda a hassle to adjust the height through this route, the only way is to have the chair go upside down and then find the right placement of the bolt to turn it loose.
To lock on the right chair height, sit over it and then push it down to decrease its height as well as raise it a bit by standing on the floor and pulling it from the sides of armrests to increase its height limit.
Find the comfortable position by now, get de-seated from the office chair, and tighten the bolt again to start consuming the office chair without any problem.
That is eventually the first phase to raise the office chair without needing to hand the lever.
2- Adjusting the Back Height
Not necessarily it would always raise the seating surface from the bottom but raising the office chair from the back and through arms to feel relaxed while perceiving to get attached to the office chair without needing to ask from another person’s help to get the raise the back and the armrests.
Despite your office chairs’ build whether it possesses the outdated or the latest style, there could be some of the models available out in the market that come without a lever at all.
In order to fix the back height movement, you can either move the backrest around the front and back to feel the raise and some of the chairs have only the up and down movement from the backseat; whichever you got, you are all good to adjust the back height easily and without needing the lever at all.
See Also:
3- Clockwise and Anticlockwise
No lever it got, do not panic at all as here we got for you the clockwise and anti-clockwise movement ready to bring the noticeable change for the comfortable seating.
Relatively easier to move such chairs towards any direction and adjusting its height is made entirely convenient. So, raise the height of your office chair to go in any direction and way using clockwise and anti-clockwise.
To do it, stand up from the chair and turn the chair manually to the clockwise and anti-clockwise directions to conveniently fix its height. Once done, that is the right point to keep the chair turning before it reaches the best height you had expected.
Before calling this step done, go back to the seat and sit over it to make sure you have reached the right level that is entirely demanded by yourself to enjoy the best comfort while attaining the correct sitting posture to shed away all the tiredness and muscle strains.
4- Old-dated Non-Pneumatic Chair
If you have this kind of office chair, we are assured your ancestors would have purchased it a few centuries ago.
But still, you got it under your procession, you would be labeled as the person too old to be using such an old-designed office chair within this modern time.
Still, let’s get to the exclusive guide in order to raise the non-pneumatic chair without an issue;
- Flip the chair over to get to see a small lock where non-pneumatic chairs come installed that eventually prevents the chair to readjust the height accidentally.
- Unfasten the lock using the screwdriver.
- Flip back the chair to its normal posting after unfastening the lock.
- Adjust the height per your convenience. And to effectively do that, turning towards the clockwise would let you lower the seat while turning the chair counter-clockwise which would assist to raise the chair.
- Once done, reinsert the lock and tighten it fully.
Conclusion
When purchasing the that do not keep the lever at all, the persons who purchase such office chairs out of the blue and then happen to inquire about the lever when not finding it attached to the bottom and that is gonna cost you a stroke!
The lever indeed is a blessing to save yourself from asking how to raise office chair without lever but not having it entirely does not mean you should not have applied the tweaks to ensure those chairs are capable of getting raised where most of the people do not really see what they got inside.
Yup, that would entirely take up a considerable time to let the office chair raised to the height.
Flip the office chair and get known with what it got beneath and we are sure you would be going to get revealed with the type of mechanism enabling the raise to the office chair conveniently.
See Also:
