We are supported by our readers. If you make a purchase, we may earn a small commission at no extra cost to you. Learn More.
Recliners can have faults developed over time and instead you look around to remove these faults by buying a brand new recliner, you can go with absolutely working solutions that can fix all faults one-by-one.
As the warranty of a recliner reaches its termination, you need to be prepared that it can cause a little bit of trouble for you. Same with Lazy Boy Recliners, any sudden fall, jerk, and over-use could lead to damage to its parts, such as seat, reclining mechanism, or footrest stability.
When you use such a recliner with its footrest mechanism disturbed to find relief, it actually fails to support your back, shoulder, and feet. It happens if you don’t know how to fix a Lazy Boy recliner footrest, and you end up replacing it with one which is just shipped.
So what to do that saves your money and recliners too?
Don’t worry! In this article, we have discussed different Lazy Boy recliner’s footrest situations and their appropriate solutions, so you can get the exact answer to your current problem linked with your relieving furniture.
Let’s catch it!
Fixing Lazy Boy Footrest Spring Ratchet
Lazy boy recliners mostly get damaged from the middle of their footrest where the actual spring ratchet mechanism is located. This can cause trouble where footrest movement is suspended, and it doesn’t stay upright and downside.
To deal with it, you only need a wrench and screwdriver. These tools will help you get the springs from their holds and fasten the screws to set the springs back to their flexible locations.
How do you go about this?
First, recline the backrest to its normal state and flip its position to view inside machinery and structure. You will be able to locate all the faults from this position. Now reach the spring ratchet area and closely observe the condition of springs attached at both ends of the ratchet.
If springs are rusty, hold the ratchet with the help of a wrench and unscrew the screws holding springs tight on the ratchet. Once you have removed all springs, replace those springs with new ones and check how the footrest supports now!
1- Fixing a Sagging Recliner Footrest
A sagging footrest is the most annoying performance of a recliner that won’t impress you at all or satisfy your posture as well. In this condition, the footrest loses its locking feature to staying a footrest position at one required place. But you can solve it at home, following quicker steps.
The process involves:
Move the recliner downside and uncover its footrest ratchet mechanism with the help of scissors. You will notice the bar connected with a ratchet that is losing its flexibility and has expired. Identify it and then pluck it out by accessing its screws.
Replace it or fix it and make sure that the newly appointed bar is tight and helps to hold the ratchet cooperative with the wooden structure so that tension will develop.
Now check out by sitting in a chair and placing your feet over the footrest. If you feel the same tension due to the adjusted lock position, it means you’ve fixed it!
2- Fixing a Spring Footrest
Springs induce supportive features in the footrest, which helps connect the footrest with the rest of the chair. The seat feels unsupportive until the springs connecting the footrest with it are not reliable and tight enough. If this is the situation with your recliner, here’s the remedy!
The process involves:
Survey the footrest by skipping to the recliner’s inside mechanism and identify those rusty springs and damage due to using them for a long time. To remove them from the area, use a screwdriver and generously remove all the springs that are no longer important to connect the footrest with the seat.
Replace the removed springs with fresh ones and fasten them to the previous position with the help of a screwdriver. Reinstall all connected components to enjoy the better sitting!
3- Fixing Stubborn Recliner’s Footrest
Stubborn footrests don’t allow movements – whether upward or downward users want to move them. It is such a patience-taking job you can endure in that case because the recliner’s chassis is becoming rusty and wants immediate lubrication. To tackle this, you must be smart and don’t have to sew the whole body leather. But its solution is so simple.
The process involves:
Turn the recliner upside and pluck the seaming with the help of scissors or needle-nose pliers. This job must be done only on the downside of the recliner where the footrest is in your hand. Now after getting the chassis, be generous and smartly spray any lubricant on areas where joints are present. You can also oil by adding drops, but this can be messy. While doing so, protect your clothes and have a towel cloth in hand to clean springs and then spray oil over them.
Once you have sprayed the chassis thoroughly, check by tilting and moving the footrest deck if it moves up and down without producing noise. And you are all set!
4- Fixing a Power Electric Recliner Footrest
Electric power recliners have nothing to do manually and they come with integrated electric motors. Therefore, these recliners are tricky to recover from defaults; another reason is they don’t have in-built simple footrest mechanisms. But you can also fix the power electric recliner footrest at home. Yet, apart from some steps, you will need a professional to fix it.
The process involves:
If you have figured out that wires linked with an electric motor (that is controlled by hand remote) are messed up, the only solution is to assemble wires which restore effective performance of the motor and regain footrest agility back to its ideal state.
But if the problem is power surges, and your recliner is unable to compete with heat and heating damage, you will see no green light turned on in the recliner. Here you can solve it by calling a professional to tackle the problem.
5- Fixing One Side Leaning Footrest
Leaning footrests to one side is a common problem that is curable and you can do it at home using one to two tools with a simple grip over them. There can be many reasons your recliner’s footrest is leaning. But most causative can be the placement of the recliner on an uneven place or sudden hit to its one side.
Worry less! You can solve it.
The process involves:
Finding the affected side which is should be your first step. You will observe which components are badly crumpled and won’t stay up to support the footrest. Also, check if the screws are tight or not. Fix them up and experience again the good position of the footrest.
If the situation is out of your understanding, you may call a professional over it.
Conclusion
Adding comfort to your recliner is not always difficult once they are worn out from different locations. If you don’t know how to fix a Lazy Boy recliner footrest, you can follow the above-mentioned solutions to figure out the problem. We have highlighted different modes of footrest being affected. So that it will be easy to identify your type of problem with easy-to-follow solutions!
